Poolife Active Cleaning Granules

$89.99
Brand: Poolife
SKU: 22206
Inventory status: 6 in Stock

Product Description

Poolife Active Cleaning Granules are the perfect chlorine for your pool. This granular chlorine is a highly effective, multi-purpose product that sanitizes, prevents algae and shock treats your pool. These granules are unstabilized so you do not have to worry about overstabilzation.


Product Dosage

Chlorination:

3-4 ounces per 10,000 gallons ever day or as needed to maintain chlorine level.

Shock Treatment:

10-20 ounces per 10,000 gallons of water


Directions

How to Use:

Use only a clean, dry scoop to measure this product. DO no use the scoop for nay other purpose. If any granules settle to the bottom of the pool use brush to disperse.

Dosing directly into pool:

Add the recommended dosage of this product during evening hours while the filter pump is running. When adding this product to your pool, broadcast the product evenly over a wide area in the deepest part of the pool. If any granules settle to the bottom of the pool use brush to disperse.

Method for Skimmer Addition:

Make sure that filter pump is on and properly recirculating through skimmer. Empty skimmer of all chemicals and/or debris. Contamination may cause an explosion or the release of toxic gases. Do not use this method when an automatic chemical dispersing devise is present. Pour this product slowly into skimmer, making sure that the material is drawn into the system at the same rate: do not allow this material to accumulate as toxic gases may be generated.

Water Balance:

For best product performance, swimmer comfort, and crystal clear water: Maintain pH in the range of 7.2-7.6. Maintain total alkalinity in the range of 60-120 parts per million. Maintain calcium hardness above 200 ppm. Use a reliable test kit that measures all these ranges. Use poolife pool care products to make adjustments. Follow label directions for each product. Do not enter pool until the free available chlorine residual is 1-4 ppm for each of the below noted water treatment applications.

Opening your Pool:

For best results, see "Water Balance" section above before treatment. Always adjust and maintain pH in the 7.2 to 7.6 range. Follow "Shock Treatment" directions on this package. Allow 30 minutes for product to disperse. Test free available chlorine residual with a pool test kit. Repeat treatment as needed.

Routine Chlorination:

For best results, see "Water Balance" section above before treatment. Check Available chlorine with a a suitable test kit.

 

For Unstabilized Pools: Add 6-8 ounces of this product per 10,000 gallons of water daily or as needed to maintain free available chlorine residual at 1-4 ppm. Follow "HOW TO USE" directions.

For Stabilized Pools: Add 3-4 ounces per 10,000 gallons every other day or as needed to maintain free available chlorine at 1-4 ppm. Follow "HOW TO USE" directions.

Shock Treatment/Superchlorination:

For best results, see "Water Balance" and "How to Use" sections. every 7 days or as necessary to prevent pool problems, shock treat the pool by adding 10-20 ounces of this product per 10,000 gallons of water to provide 5 to 10 ppm available chlorine. Additional shock treatments may be required to correct problems which are caused by visible algae, high bather loads, heavy wind and rainstorms. Additional shock shock treatments may also be required to correct problems such as unpleasant odors and eye irritation. Check the available chlorine with a suitable test kit.

Algae Control:

Follow "Shock Treatment" directions on this label. Add this product as close as possible to any algae on the sides or bottom of the pool. In necessary, repeat the treatment. To prevent possible staining or bleaching, take the following steps immediately after treatment: Thoroughly clean pool by brushing surface of algae growth, vacuum and cycle through filter. For preventative algae control: Shock treatment should control algae. However, if problems persist use your preferred poolife algaecide product regularly.

Winterizing:

For Best results, see "Water Balance" section before treatment. Gradually add 30 ounces of this product per 10,000 gallons of water that is clear and clean. This product 15 ppm free available chlorine. Follow "How to Use" directions on this package. Run the filter until granules are completely dissolved. Cover the the pool with a pool cover. Prepare heater, pump and filter components for winterizing by following manufacturers directions.

 


Ingredients

Calcium Hypochlorite: 68%, Other Ingredients: 32%, Minimum Available Chlorine: 65%