The Orenda PR-10000 Phosphate Remover is designed to react with the phosphates in the water to make them able to be removed from the pool. The formula makes the inert phosphates sink out of solution to be vacuumed or filtered out later. This product may make the water cloudy for up to 2 days after application.
- Designed to react with the phosphates in the water
- Makes the inert phosphates sink out of solution to be vacuumed or filtered out
- Could cause temporary cloudiness in the water, but it is not permanent
Note: Do not add more that 8 ounces per 10,000 gallons of water. Apply PR-10000 evenly into the water around the perimeter. Use the reference chart for complete dosing information, after checking ortho-phosphates level with a test kit. Do not apply more than 8 ounces in an average residential pool per treatment. Clouding will occur upon addition and increase filter pressure, so backwash and/or clean the filter as necessary. Recheck the phosphate level after application and treat accordingly. Also test phosphate levels monthly to ensure proper maintenance. Be aware that phosphate testing is subjective and is influenced by existing algae. Algae in a pool will result in a false reading. Poly-phosphorus and other chemicals are added by municipalities to protect the infrastructure piping. Poly-phosphorus does not show up on ortho-phosphate test kits, therefore will not display true phosphate loading.
Dosing Chart (10,000 Gallons)
|Ortho-Phosphate Level||Ounces to add|
|0-500 ppb||2 ounces|
|500-1,000 ppb||4 ounces|
|1,000-2,000 ppb||8 ounces|
|2,000+ ppb||10 ounces plus|