The Bio-Dex Plaster White 'N Brite product is a specially formulated additive for a plaster pool acid wash solution that is intended to eliminate calcium, copper, and other organic and metal stains on the walls of the pool. The White 'N Brite additive helps the acid wash mixture's fumes not smell so harsh. It also helps thicken the acid wash so that it can cling to the walls in order for it to clean deeper, so that it can once again look like a new pool.
- Helps make an extremely stained plaster pool look like brand new
- Thickens the acid wash solution for a deeper clean
- Reduces the fumes of the acid wash solution
- Removes calcium, copper, and other organic and metal stains
Always add acid to water, never add water to acid. Wear protective eyewear and a mask when handling the acid wash solution. This product is intended to be used after the pool has been drained. (Keeping the product warm will provide for easier mixing)
Step 1: Dilute one gallon of swimming pool muriatic acid into the desired amount of water. A good "starter" mix would be one gallon acid to two gallons of water. Use a 5 gallon or larger clean plastic pail.
Step 2: Add 8 ounces of Bio-Dex Plaster White 'N Brite to the diluted acid solution. Stir solution slowly for one minute to thicken, using a wood or plastic stir stick. To boost the solution add 6 to 8 ounces (or more) of Bio-Dex Aquadex 50 Stain-Off. You are now ready to acid wash the pool.
Step 3: Using a small plastic pail, pour the mixed solution along the tile line and allow solution to run down the plaster and dwell for 4 to 5 minutes. Hose off. Brushing is optional.
Repeat until entire pool has been covered in solution. If foaming is a problem, Use Bio-Dex Foam Stop.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.