BioGuard Sparkle Up is a cellulose filter aid intended to be used when your filter experiences difficulty in filtering very small particles. This product helps the filter remove tiny particles of dirt, plaster dust, dead algae, pollen, and other small bits of debris. It also helps prevent metals, which prevents staining. Sparkle Up has been proven to enhance filter performance and it is approved for use in all filter types.
1 part Sparkle Up and 2 parts D.E. to equal normal filter change.
8 Cups per 100 sq ft of filter area.
- 1 Cup for 12 in Diameter Filters
- 2 Cups for 18 in Diameter Filters
- 4 Cups for 24 in Diameter Filters
- 6 Cups for 30 in Diameter Filters
- 9 Cups for 36 in Diameter Filters
- 13 Cups for 42 in Diameter Filters
- 17 Cups for 48 in Diameter Filters
Before using this product, make sure the filter, hair and lint pot and skimmer baskets are clean. To obtain uniform distribution of this product, mix the required amount in a clean bucket of water and add the slurry slowly through the skimmer with the pump on. Follow specific directions below for your type of filter.
Thoroughly backwash filter. Set filter to normal filter position. Prepare a mixture of 1 part this product and 2 parts D.E. in sufficient quantity to make up the normal filter charge. Mix the D.E. and this product together in water. Coat the filter with this mixture, as you normally would using D.E. alone. Operate as usual until a new charge is required.
Backwash filter thoroughly. Set filter to normal filter position. Add this product according to usage directions using amounts specified in chart below. Run filter continuously. Backwash after 24 hours sooner if the pressure guage reaches the maximum recommendations. Repeat if necessary to clear water completely.
Remove and clean cartridge. Seat cartridges properly in the filter. With pump running, add 8 cups of this product per each 100 square feet of filter area. (Refer to directions for use). Clean cartridges when pool clears. or if filter pressure reaches manufacturers recommended maximum. Repeat treatment if necessary. Use this product once a month to help maintain optimum water clarity.
No reviews yet
I’ve been battling fine pollen and mustard algae for3 years. After poolgeek recommend this sparkle up product it eliminated it completely after 1 application. I’ve been using filter socks to catch most of it when vacuuming but after the water settled it would begin collecting some on the bottom in patches. Super thrilled this eliminated my issue
Fast and accurate!
I've used this for 7 years. The pool truly is sparkling after use. The only downside is you have to wash the filter a couple of times to remove the particles. Also, don't use it early in the season. Wait until the pool is stabilized after being opened in the late spring.
After using Bio guard pool magnet plus I did not think it could get any better but after adding sparkle up our pool is back to perfect after a huge issue of metal contaminants in our pool due to an old pool heater - cannot say enough good about these products!
Sparkle up did as it was to supposed to do. My pool wAr was extremely clouds after using your product to remove metals. Local distributor did not have Sparkle up. After it arrived our was Crystal clear again
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.