Free Shipping On Orders Over $100

SeaKlear Spa Sanitizing Granules (5 lb)

By SeaKlear

Select Qty Size Price
Single $46.51

Oh No! SeaKlear Spa Sanitizing Granules (5 lb) is currently sold out.

We can email you when it is back in stock (usually a day or two).

Product Description

SeaKlear Spa Sanitizing Granules are a highly effective way to sanitize your chlorine pool, keeping it clean, clear, and healthy. Its quick-dissolving granules can be added directly to your spa water without any messy pre-dissolving or mixing needed. Each granule is made of 99% pure chlorine for superior performance. Best of all, Spa Sanitizing Granules are made to the exacting standards SeaKlear demands of all its products, allowing you to buy with confidence.


Product Dosage

Start Up:

6 tsp per 500 gallons of water until 4-5 ppm of chlorine is reached.

Routine Maintenance:

9 tsp per 500 gallons of water per use.


Directions

Broadcast the product evenly over a wide area in the deepest part of the spa with water circulating.

Hot Tub Use:

  1. Each level teaspoon (0.17 oz) of this product will provide approximately 1.4 ppm, available chlorine in 500 gallons of water.
  2. Using and appropriate test kit, test and adjust the water to the following values: pH 7.2-7.8, total alkalinity 60-100 ppm, calcium hardness 200 ppm minimum.
  3. Maintain these conditions for proper spa and hot tub operation by frequent testing with a test kit.
  4. Do not allow cyanuric acid level to exceed 150 ppm.
  5. It is recommended that spa and hot tubs be drained every 30-90 days. More often under heavy use.
  6. Consult manufacturers recommendations concerning the compatibility of chlorine sanitizers with their equipment.
  7. Some oil, lotions, fragrances and cleaners may cause foaming or cloudy water and may react with chlorine sanitizers to reduce their efficiency.

Start Up:

  1. Turn on the circulation system and ensure that it is operating properly.
  2. Add 6 teaspoons of this product for each 500 gallons of water.

Check the free available chlorine and if below 4-5 ppm repeat as needed. Re-entry into treated spa is prohibited above levels of 3 ppm of chlorine.

Regular Use:

  1. Turn on the circulation system and ensure that it is operating properly.
  2. Scatter approximately 3 teaspoons per 500 gallons of this product over the surface of water.
  3. Always use a clean dry spoon.
  4. Test the FAC and add additional product, if necessary, to attain 4-5 ppm.
  5. Maintain 1-3 ppm FAC while the spa or hot tub is in use.
  6. After each use, shock treat with 9 teaspoons per 500 gallons water to control odors and algae.
  7. Repeat as needed.
  8. Re-entry into treated spas is prohibited above levels of 3 ppm of chlorine.

Ingredients

Sodium Dichloro-s-Triazinetrione Dihydrate: 99%, Other Ingredients: 1%, Available Chlorine: 55.5%