Initial Application:
This product is specially designed for use in floaters and automatic type feeders except for bromine only type feeders*. Prior to adding this product to the feeder, refer to the operating instructions provided by the manufacturer of the unit. Add to the feeder an initial supply of tablets. Close the feeder, making sure the lid is securely tightened. Adjust the feeder to the lowest setting according to the manufacturer's instructions. Approximately 3 to 4 days after adding the initial supply of tablets to the feeder, turn off the pump, open the feeder and observe the quantity of tablets remaining. If more than 1/2 of the tablets are gone, contact your ProTeam dealer for recommendationson how to reduce your feed rate. If at least 1/2 of the tablets remain in the feeder, turn pump back on and check the sanitizer residual with an accurate test kit. Adjust the feeder to provide a sanitizer level within the ideal 1-1.5 ppm range.
Routine Maintenance:
Test pool water regularly (at least weekly) and check feeder weekly, refilling as needed. Add initial product and adjust the feeder as needed to maintain an ideal sanitizer level of 1-1.5 ppm. Regular use of an accurate test kit is recommended to make certain adequate levels of sanitizer and proper pH are being maintained in your pool.
