Free Shipping On Orders Over $100

Poolife Instant Clear Cleaning Granules (35 lb)

By Poolife

Select Qty Size Price
Single $144.40

Product Description

Poolife Instant Clear Cleaning Granules (35 lb) are an effective stabilized chlorine granules used to control algae, kill bacteria and destroy organic materials. This product can be used as a daily chlorine addition and/or as a pool shock.


Product Dosage

Maintenance Dose:

3-5 ounces per 10,000 gallons of water every other day or as needed to maintain chlorine residual of 1-4 ppm.

Shock Treatment/Super Chlorination:

12-24 ounces per 10,000 gallons of water every week.


Directions

Add the recommended dosage of this product directly to the pool during then evening hours while the filter is running. When adding this product to your pool, broadcast the product evenly over a wide area in the deepest part of the pool. Use only a clean, dry scoop to measure this product. Do not use the scoop for any other purpose. If any granules settle to the bottom of the pool use brush to disperse.

Water Balance:

For best product performance, swimmer comfort, and crystal clear water. Maintain pH in the range of 7.2 to 7.6. Maintain Pool Alkalinity in the range of 80 to 120 ppm. Maintain calcium hardness above 200 ppm. Use a reliable test kit that measures all these ranges. Use Poolife pool care products to make adjustments. Follow label directions for each product.

Opening Your Pool:

For best results, see "Water Balance" section above before treatment. Throughout the pool season, adjust and maintain pH at 7.2 to 7.6. Check available chlorine wiht a suitable test kit. Do not reenter pool untilt the free available chlorine residual is 1.4 ppm/ Repeat treatment as needed. Add 3-5 ounces of this product per 10,000 gallons of pool water every other day or as often as needed to maintain 1-4 ppm free avalable chlorine.

Shock Treatment/Superchlorination:

For best results, see "Water Balance" and "How To Use" sections above before treatment. Every 7 days, or as necessar to prevent pool problems, shock treat the pool by adding 12-24 ounces of this product per 10,000 gallons of water to provide 5-10 ppm available chlorine. Additional shock treatments may be required to correct problems which are caused by visible algae, high bathing loads, heavy wind and rainstorms. Additional shock treatements may also be required to corret problems such as unpleasnt odors and eye irritaion. Check the available chlorine wiht a suitable test kit. Do Not reenter the pool witil the free availe chlorin residual is 1-4 ppm.


Ingredients

Sodium Dichloro-s-Triazinetrione: 99%, Other Ingredients: 1%, Available Chlorine: 56%