Free Shipping On Orders Over $100

Omni Chlorinating Stix (18 lb)

By Omni

Select Qty Size Price
Single $91.37
Case of 2 $182.74

Product Description

Omni Chlorinating Stix are a slow dissolving product that releases sufficient chlorine to reduce the growth of harmful algae and micro-organisms in your pool. This product needs no filters and has 90% available chlorine. It is slow eroding, which makes it effective for use in plastic skimmers, automatic chlorinators, or floaters. This product also has a long shelf life. This effective stabilized disinfecting agent will safely kill harmful bacteria in your pool.


Product Dosage

1-2 oz per 10,000 gallons of water per day.


Directions

PreTreatment:

  1. Ensure all equipment is working properly.
  2. Backwash the filter system following manufacturers directions. 
  3. Adjust pH to between 7.2-7.6. 
  4. In chlorinated systems, add stabilizer to establish a minimum stabilizer level of 30-40 ppm to reduce the degradative effects of sunlight upon the chlorine residual. 
  5. Check for metals and if present add a stain and scale inhibitor to prevent staining of pool surface due to metals. 
  6. Adjust chlorine residual residual to 1-3 ppm. 
  7. When using other products as outlined in directions for this product, always follow directions on those products.

Automatic Chlorinators and Floaters:

  1. This product can be used in feeding mechanisms such as automatic chlorinators and floaters as a maintenance treatment.
  2. Fill unit with this product and adjust the feeding mechanism to assure a constant treatment level of 1-3 ppm available chlorine in the pool water. 
  3. Normally 1-2 ounces of this product per 10,000 gallons will be needed daily. 
  4. Use a test kit or test strips to monitor chlorine levels and adjust the chlorine feed mechanism as needed. 
  5. Check and refill chlorinator as needed. 
  6. Do not let this product come in direct contact with vinyl liners or other bleachable surfaces as damage may occur.

Skimmers:

  1. This product may be used in plastic skimmers only if skimmer and piping between skimmer and pump are plastic. 
  2. Do not add other chemicals through the skimmer when using this product in skimmer as an explosion or fire may result. 
  3. Do not turn pump off for more than 8 hours in vinyl pools when this product is in skimmer, initially add one of the this product per 10,000 gallons of water. 
  4. Add additional product as determined by a test kit or test strips to maintain chlorine residual of 1-3 ppm.

Ingredients

Trichloro-s-Triainetrione: 99%