Lo-Chlor Lo-Phos Max

If algae is present, add a treatment of Lo-Chlor Pool Algaecide prior to beginning phosphate removal. Clean or backwash filters and ensure that the pool is balanced. Test pool water for phosphate levels using a test kit approved for swimming pool use. Using the chart below, measure the required quantity of Lo-Phos Max for your pool. Slowly add Lo-Phos Max directly to the pool, distributing over as wide an area as possible.

Example: Dosage rate for 10,000 gallon pool with a phosphate level of 1,000 ppb requires a 2 ounce dose.

1. Immediately following the addition of Lo-Phos Max, place one Miraclear Clarifier Tab in pump basket or use 2 ounces of Miraclear Blue Liquid Clarifier per 4,000 gallons of pool water. The addition of the clarifier will help clear the cloudiness associated with phosphate removal.
2. Run filtration system continuously for 24 hours. Check filter pressure regularly and backwash if necessary.
3. Retest phosphate level of pool water at least 24 hours after treatment. If necessary, repeat dosage of Lo-Phos Max at weekly intervals until phosphate levels is within the acceptable range. for faster results, Lo-Phos Max can be added in 24 hour intervals.
4. Test pool regularly for residual phosphate levels.
5. To maintain phosphates below 125 ppb, add 1 ounce of Lo-Phos Max per 15,000 gallons of pool water weekly.