|
|
|
|
|
|
Zeobest Zeolite Filter Media - 25 lbs
|
|
Product # ZEO25
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Product Description
|
|
Zeobest provides pool owners with a way to replace your filtering sand to dramatically improve your pool water quality, filtering particles down to 3 microns versus traditional sand's 30-40 microns. Its unique silica formula needs only half the amount of material compared to sand, yet its filtering capabilities approach that of diatomaceous earth (DE) while costing far less. It is able to last just as long as normal sand, yet requires less maintenance. After use, your sand filter will provide your pool with softer, more natural water with a jewel-like brilliance.
|
|
|
|
|
|
|
|
|
|
|
Tech Specs
|
|
Chemical Type:
|
Filter Enhancements
|
|
Brand:
|
Zeobest
|
|
|
|
|
|
|
Features
|
|
Installation and Start Up Instructions - Consult manufacturer's literature for media specification instructions and support gravel requirements.
- Remove filter top.
- Cover pipe openings.
- Remove existing media.
- Check all piping & laterals for tightness, cracks and other defects.
- Fill filter to halfway point with water.
- Pour Zeobest filter media into filter per manufacturer's instructions. Fill Zeobest to same bed depth as filter sand.
- Remove pipe coverings. Replace and tighten filter top.
- Set filter in backwash mode before starting pump. Backwash thoroughly for 10 to 15 minutes or until backwash water is clear for several minutes.
Zeobest Ammonia Regeneration Instructions Zeobest possesses the ability to absorb ammonia as it filters your pool water to reduce or eliminate chloramine formation. Once Zeobest has been absorbed its capacity of ammonia, you have the option of recharging Zeobest. Soaking Zeobest in a salt water solution allows the salt (sodium ions) to replace the ammonia (ammonia ions). Recharging is recommended for Indoor commercial, municipal and residental pools. It is not necessary to regenerate Zeobest for outdoor pools.- Dissolve 0.8 lbs. of salt per gallon of water.
- Remove filter top.
- Pour dissolved salt water solution over media until filter bed is completely submerged.
- Replace & tighten filter top.
- Allow media to soak a minimum of 4 hours. Recommended soak time is overnight (10 to 12 hours).
- After soaking is completed, set filter to backwash and run normal backwash. Ammonia backwashes out with your backwash water.
|
|
|
|
|
|