|
Please perform the following actions before use:
1. Check all pool equipment and be sure it is working properly.
2. Backwash or clean filter following manufacturer's directions.
3. Test pH and adjust to between 7.2 to 7.6.
4. In chlorinated pools, add a minimum 30 to 40 ppm stabilizer level to reduce the effects of sunlight upon the chlorine residual. Do NOT add stabilizer to brominated pools.
5. Test pool water for the presence of metals prior to use of this product. If any metals are present, add a stain-inhibiting product to prevent the deposition of metal stains on pool surfaces.
6. When using other products as directed in conjunction with this product, always follow label directions of those products.
Application Method A:
1. Ensure pool circulation pump is operating. Continue to operate recirculation pump for 4 to 8 hours following product use.
2. Broadcast the appropriate dosage of this product across the deep end of the pool
3. Brush any potentially bleachable surfaces, such as vinyl, paint, fiberglass, or colored plaster. Use a compatible brush to prevent undissolved clumps from resting on these surfaces.
Application Method B
If your pool has a maximum depth of less than 4 feet deep or the pool water is 65 degrees F or less, use Application Method B.
1. Ensure pool circulation pump is operating. Continue to operate recirculation pump for 4 to 8 hours after product addition.
Dissolve this product outdoors using a clean plastic bucket. Fill bucket with water, then add product. Use a clean plastic or wooden spoon to stir. Never add more than 1 pound of this product to less than 3 gallons of cool water. NEVER add water to product.
|