| SpaGuard's Soft Soak Spa Conditioner gives spa owners a one-step treatment that prevents and controls the oil build-up that can cause waterline stains, while its granulated pellets are concentrated enough to only require 1 application to your spa upon start-up after your spa is drained and refilled. Soft Soak Spa Conditioner replaces the product formally known as Soft Soak Waterline Control. |  |
Dosage
Intitial Start-Up: 5 oz. per 150 gallons.
|
Ingredients
A powerful mixture of conditioning ingredients.
|
Product Use
Use this product when starting your spa with the soft soak system. This product will help prevent waterline film.
|
Directions
Consult your SpaGuard SoftSoak Dealer for proper water balance. Maintain the pH between 7.4-7.6, total alkalinity at 80-120 ppm and calcium hardness at 200-300 ppm while using the SoftSoak System. Initial Start-Up/ Fresh Fill: - Balance spa to the parameters above with SpaGuard pH Decreaser, Total Alkalinity Increaser, and Calcium Hardness Increaser according to lable directions.
- With pump on and blowers turned off, add 10 tablespoons (5 oz) of SoftSoak Spa Conditioner per 150 gallons of water directly to the spa.
- Circulate water for 30 minutes then add SoftSoak Stain and Scale, SoftSoak Shock, adn SoftSoak Sanitizer according to label directions.
- Under normal conditions, you will not have to reapply SoftSoak Spa Conditioner until you drain and refill your spa.
|
Reviews
|
|
|