Spa Essentials Chlorinating Concentrate

Pre-Treatment Checklist

1. Ensure all spa and hot tub equipment is working properly. 
2. Backwash/clean the filter system following manufacturers directions. 
3. Adjust pH to between 7.2-7.6. 
4. When using other products as outlined in the directions for this product, always follow directions on those products.

Maintenance Doses:

1. With pump on, add 1/2 teaspoon of this product per 100 gallons of water (or 5 teaspoons per 1,000 gallons) as an initial treatment. 
2. Repeat at 15 to 20 minute intervals until a residual of 3 - 5 ppm of available chlorine is established as determined by test kit. 
3. A test kit must be used regularly to determine the frequency of additional doses of this product needed to maintain the chlorine residual of 3 -5 ppm.

Superchlorination:

1. Use 1 teaspoon of this product per 100 gallons of water (or 1/4 cup per 1,000 gallons.) 
2. Super-chlorination may be needed on a nightly basis in a heavily used spa or as infrequently as once a week in a moderately used spa.

Initial Start-Up:  1/2 teaspoon per 100 gallons until residual of 3-5ppm is met.

  
Maintenance Dose:  1/2 teaspoon per 100 gallons until residual of 3-5ppm is met.

  
Super-Chlorination:

1 teaspoon per 100 gallons of water.  Super-chlorination may be needed on a nightly basis in a heavily used spa or as infrequently as once a week in a moderately used spa.

Active Ingredients

Sodium Dichloro-s-Triazinetrione Dihydrate - 99%

Inert Ingredients

1%