**Be sure to wear safety glasses or goggles and protective gloves**
1. Apply entire contents of the Iron Stain Identifier over the selected test area. Allow test solution to sit for 15 to 30 seconds and brush away.
2. Next, apply entire contents of the Copper Stain Identifier to a new area. Allow test solution to sit for 15 to 30 seconds and brush away.
3. Visually inspect both test areas to determine which treatment did the best job of removing or lightening the stain. Select the Simplicity stain removal product that was most effective and apply according to label directions.
4. After the metals have been removed, re-balance water according to the following chart.
| Chlorine or Bromine |
1 to 4 ppm |
| pH |
7.4 to 7.6 |
| Total Alkalinity |
125 to 150 ppm* |
| Calcium Hardness |
Less than 400 ppm |
*80 to 150 ppm for pools equipped with a chlorine generator
1 bottle of Iron or Copper Stain Identifier per test.
Use Spot Clear Metal Stain Identification Kit to quickly and easily identify whether iron or copper is the source of staining in your pool, eliminating any guesswork when selecting the right treatment.