|
|
|
|
|
|
SeaKlear Spa Sanitizing Granules
|
|
Product # SKSGRANULES
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Product Description
|
|
SeaKlear Spa Sanitizing Granules are a highly effective way to sanitize your chlorine pool, keeping it clean, clear, and healthy. Its quick-dissolving granules can be added directly to your spa water without any messy pre-dissolving or mixing needed. Each granule is made of 99% pure chlorine for superior performance. Best of all, Spa Sanitizing Granules are made to the exacting standards SeaKlear demands of all its products, allowing you to buy with confidence.
|
|
|
|
|
|
|
|
|
|
|
Tech Specs
|
|
Chemical Type:
|
Chlorine
|
|
Brand:
|
SeaKlear Spa
|
|
|
|
|
|
|
Directions
|
|
Broadcast the product evenly over a wide area in the deepest part of the spa with water circulating. Spa and hot tub use: - Each level teaspoon (0.17 oz) of this product will provide approximately 1.4 ppm, available chlorine in 500 gallons of water.
- Using and appropriate test kit, test and adjust the water to the following values: pH 7.2-7.8, total alkalinity 60-100 ppm, calcium hardness 200 ppm minimum.
- Maintain these conditions for proper spa and hot tub operation by frequent testing with a test kit.
- Do not allow cyanuric acid level to exceed 150 ppm.
- It is recommended that spa and hot tubs be drained every 30-90 days. More often under heavy use.
- Consult manufacturers recommendations concerning the compatibility of chlorine sanitizers with their equipment.
- Some oil, lotions, fragrances and cleaners may cause foaming or cloudy water and may react with chlorine sanitizers to reduce their efficiency.
Start Up: - Turn on the circulation system and ensure that it is operating properly.
- Add 6 teaspoons of this product for each 500 gallons of water.
Check the free available chlorine and if below 4-5 ppm repeat as needed. Re-entry into treated spa is prohibited above levels of 3 ppm of chlorine. Regular Use: - Turn on the circulation system and ensure that it is operating properly.
- Scatter approximately 3 teaspoons per 500 gallons of this product over the surface of water.
- Always use a clean dry spoon.
- Test the FAC and add additional product, if necessary, to attain 4-5 ppm.
- Maintain 1-3 ppm FAC while the spa or hot tub is in use.
- After each use, shock treat with 9 teaspoons per 500 gallons water to control odors and algae.
- Repeat as needed.
- Re-entry into treated spas is prohibited above levels of 3 ppm of chlorine.
|
|
|
|
|
|
|
Dosage
|
|
Each level teaspoon (0.17 oz) of this product will provide approximately 1.4 ppm, available chlorine in 500 gallons of water.
Start-Up:
6 teaspoons per 500 gallons or until free available chlorine reaches 4-5 ppm.
Regular Use:
9 teaspoons per 500 gallons after each use.
|
|
|
|
|
|
|
Ingredients
|
|
Active Ingredients
Sodium Dichloro-s-Triazinetrione Dihydrate - 99%
Inert Ingredients
1%
Available Chlorine - 55.5%
|
|
|
|
|
|
|
Product Use
|
|
Use this product as a fast dissolving form of chlorine for your hot tub. This product works great when combined with a chlorine free shock and a natural clarifier.
|
|
|
|
|
|