|
|
|
|
|
|
SeaKlear Algae Prevention & Remover
|
|
Product # SEAKLEARALGAEPREVENTION
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Product Description
|
|
SeaKlear Algae Prevention & Remover only requires application once every 3 months to control algae. After application of this product, SeaKlear promises your pool water will sparkle like never before. This product is effective against the likes of blue-green, black, and mustard algae. It is also formulated to be non-staining. Algae Prevention & Remover is an excellent broad-spectrum algaecide with a long-term residual effect in the pool. It is based on a unique, low-dose organic copper complex, which is extremely effective and economical.
**Safe for use with pools and spas**
|
|
|
|
|
|
|
|
|
|
|
Tech Specs
|
|
Chemical Type:
|
Algae - Remover, Algae - Preventative
|
|
Brand:
|
SeaKlear Pool
|
|
|
|
|
|
|
Directions
|
- Maintain pool water in the pH range 7.2 to 7.8. Total alkalinity 80 ppm to 120 ppm. Adjust pH to 7.2 for severe algae.
- Ensure that filtration system is working properly.
- Brush pool regularly.
- Calculate the volume of SeaKlear Algae Prevention & Remover required for your pool.
- Add the product directly to pool deep end preferably in front of water return.
- Dilute in a bucket of pool water when adding to pools with plaster finishes.
SeaKlear Algae Prevention & Remover must be used along with adequate levels of EPA registered sanitizers to control bacteria.
|
|
|
|
|
|
|
Dosage
|
|
Every 3 Months:
16 oz. per 10,000 gallons.
Severe Algae:
32 oz. per 10,000 gallons.
|
|
|
|
|
|
|
Ingredients
|
|
Active Ingredients
Copper Sulfate Pentahydrate - 11.8%
Copper as Elemental - 3%
Inert Ingredients
82.2%
|
|
|
|
|
|
|
Product Use
|
|
Use this product to prevent algae for up to 3 months, when used with a EPA registered sanitizer and shock. This product can also be used safely in spas.
|
|
|
|
|
|