|
|
|
|
|
|
Robarb pH Up
|
|
Product # ROBARBPHUP
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Product Description
|
|
Robarb's pH Up enables users to raise their pool's pH level when too low, which helps to prevent scaling, staining, and clouding of the water. As pH levels are constantly in flux, the ability of pH Up to increase your pH level when needed is critical for proper pool maintenance. This treatment is compatible with chlorine, bromine, biguanide, ozone, and salt water sanitizing systems.
|
|
|
|
|
|
|
|
|
|
|
Tech Specs
|
|
Chemical Type:
|
pH - Increaser
|
|
Brand:
|
Robarb Pool
|
|
|
|
|
|
|
Directions
|
|
*When pool pH is below 7.2, as determined by a pH test kit. With the pump operating, carefully distribute pH Up into the deep end of the pool.
**Do not allow the pH to exceed 7.8 or cloudy water and scale formation may result
pH Below 6.6
1 pound per 10,000 gallons
pH Between 6.6 to 7.0
3/4 pound per 10,000 gallons
pH Between 7.0 to 7.2
1/2 pound per 10,000 gallons
*If the pH value is continually low, the pool water should be tested for total alkalinity.
**If the total alkalinity is low, it should be corrected by adding Alkalinity Up.
|
|
|
|
|
|
|
Dosage
|
| When pH is below 6.6 | 1 lb. | | When pH is between 6.6 and 7.0 | 3/4 lb. | | When pH is between 7.0 and 7.2 | 1/2 lb. |
|
|
|
|
|
|
|
Product Use
|
|
Use this product to increase the pH level in swimming pool water. Robarb pH Up is compatible with all sanitizer types.
|
|
|
|
|
|