Robarb Stabilizer

1. The most effective and economical use of our stabilized chlorine chemicals will be obtained if the pool water is first stabilized by adding an inital 30 ppm of stabilizer to the pool.
2. To obtain a 30 ppm level, add 1 lb. of stabilizer to the pool for each 4,000 gallons of pool water.
3. Add stablizer slowly to surface skimmer.  Make sure filter is clean with full pressure drop.  Recirculate water for at least 6 hours.
4. Maintain a cyanuric acid level of 30-50 ppm using a suitable test kit.  Check the concentration of cyanuric acid periodically at least once a year.
5. If these stabilized chlorination chemicals are used to maintain the pool, sufficient make-up stabilizer will be added thereby so that additional stabilizer will not be needed unless the pool water is completely or substantially emptied and refilled - in which case, pool water must be stabilized again.  Certain non-stabilized chlorine products will not, however, provide make-up stabilizer, so that additional stabilizer will be needed from time to time.

To obtain a 30 ppm level, add 1 lb. of stabilizer to the pool for each 4,000 gallons of pool water.