|
Robarb pH Up
|
|
|
PoolGeek.com Price:
|
|
|
|
|
| Show All | Description | Specifications | Directions | Manufacturer Info | Reviews |
| Robarb's pH Up enables users to raise their pool's pH level when too low, which helps to prevent scaling, staining, and clouding of the water. As pH levels are constantly in flux, the ability of pH Up to increase your pH level when needed is critical for proper pool maintenance. This treatment is compatible with chlorine, bromine, biguanide, ozone, and salt water sanitizing systems. | |
Dosage
| When pH is below 6.6 | 1 lb. | | When pH is between 6.6 and 7.0 | 3/4 lb. | | When pH is between 7.0 and 7.2 | 1/2 lb. |
|
Product Use
Use this product to increase the pH level in swimming pool water. Robarb pH Up is compatible with all sanitizer types.
|
Directions
- When the pool pH value is below 7.2, as determined by the use of a pH test kit, carefully distribute pH up while the pump is in operation into the deep end of the pool. Do not allow the pH to exceed 7.8 or cloudy water and scale formation may result.
For each 10,000 gallons of water add pH Up in the following amount:
1 lb. when pH is below 6.6.
3/4 lb. when pH is between 6.6 and 7.0.
1/2 lb. when pH is between 7.0 and 7.2 - If the pH value is continually low, the pool water should be tested for total alkalinity.
- If the total alkalinity is low, it should be corrected by adding Alkalinity Up.
|
Reviews
|
|
|