|
Omni Breakout Extra
|
|
|
PoolGeek.com Price:
|
|
|
|
|
| Show All | Description | Specifications | Directions | Manufacturer Info | Reviews |
| Omni Breakout Extra is a premeasured granular chlorinating weekly shock treatment that will keep your water brilliantly clear. Optimize your swimming experience by destroying contaminants such as perspiration, sun tan oils, and other impurities that can affect swimmer comfort. This product is easy to use, just put it directly into the pool with no pre-dissolving. Dull, cloudy water can lead to strong odors and eye irritation, so keep your water clean, clear, and sparkling with Breakout Extra. |  |
Dosage
1 lb. per 20,000 gallons of water every week or 1 lb. per 10,000 gallons every 2 weeks.
|
Ingredients
| Calcium Hypochlorite | 47% | | Other Ingredients (includes a clarifier/filtration/enhancer/scale inhibitor) | 53% | | Available Chlorine | 47% |
|
Product Use
Use this product as a regular pool shock. When used weekly with chlorine and algaecide you are virtually guaranteed a sparkling clear pool.
|
Directions
Important: - Ensure all equipment is working properly.
- Backwash the filter system following manufacturers directions.
- Adjust pH to between 7.2-7.6.
- In chlorinated systems, add stabilizer to establish a minimum stabilizer level of 30-40 ppm to reduce the degradative effects of sunlight upon the chlorine residual.
- Check for metals and if present add a stain and scale inhibitor to prevent staining of pool surface due to metals.
- Adjust chlorine residual residual to 1-3 ppm.
- When using other products as outlined in directions for this product, always follow directions on those products.
To Shock: - Using application methods, apply 1 lb. per 20,000 gallons of water every week or 1 lb. per 10,000 gallons every 2 weeks when the pool is not in use (preferably at night.)
- Reapply after heavy rain or heavy bather loads.
Application Methods: - When the maximum depth of the pool is less than 4 feet deep or when water is less than 65 degrees, pre-dissolve using Application Method B.
- For all other applications, use Application Method A.
Application Method A: - Be sure pool circulation pump is on.
- Holding container close to pool surface, broadcast the appropriate dosage of this product across the surface of the pool in the deep end of the pool. Note: In pool with potentially bleachable surfaces, such as vinyl, paint, fiberglass or colore plaster, use a pool brush following application.
- Brush the surfaces to ensure dissolving of the product.
- Never allow undissolved product to rest in contact with bleachable pool surfaces.
Application Method B: - Be sure pool circulation pump is on.
- Dissolve this product outdoors.
- Use clean plastic bucket and place water into bucket.
- Then add product to water in bucket.
- Use a clean plastic or wooden spoon to stir.
- Never add more than 1 lb. of this product to less than 3 gallons of cool water.
- After dissolving this product, pour the solution around the edge of the pool with circulation pump on.
|
Reviews
|
|
|