|
|
|
|
|
|
Nature 2 Express (Aboveground)
|
|
Product # W20171
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Product Description
|
|
Nature2's Express (Aboveground) allows pool owners looking to reduce their chlorine consumption while still maintaining a healthy pool with an effective self-contained sanitizer. Express installs on existing pool plumbing, using silver and copper compounds to sanitize your water, dramatically lowering the amount of chlorine your pool consumes. Lasting 6 months, this sanitizer canister will last practically one whole pool season, depending on where you live, and will save you significant time and money normally devoted to chlorine maintenance.
|
|
|
|
|
|
|
|
|
|
|
Tech Specs
|
|
Chemical Type:
|
Mineral Purifiers
|
|
Brand:
|
Nature 2
|
|
|
|
|
|
|
Directions
|
|
Before starting up a new Nature2 cartridge, clean debris and algae out of the pool and pool equipment. Balance pool water before installing Nature2 cartridge. ph should be 7.4-7.8, calcium hardness between 200-400 ppm, total alkalinity between 80-150 ppm. Consult with your Nature2 Dealer for specific water balance instructions. Vessel Installation: - Turn pool pump off. Secure clamp assembly on the return line. For aboveground pools with corrugated pipe, use enclosed PVC adapter.
- Cut hole in rigid PVC pipe using a power drill and the enclosed hole saw.
- Insert the flow diverter into hole and snap it into place.
- Snap dispenser shell onto clamp.
- Thread the cartridge into the clamp, turn on pool pump and activate the cartridge. See manual for start-up instructions.
Install the Cartridge: - Install the cartridge into your pool filter after water is balanced.
- Superoxidize the pool water with chlorine according to manufacturers instructions to burn off contaminants and active cartridge. Initial superoxidation with chlorine is required to burn off contaminants and activate cartridge.
- Run the circulating pump either - 24 hours a day for 4 days, maintaining 1-2 ppm free chlorine throughout, or 6 hours per day for 14 days, maintaining 1-2 ppm free chlorine throughout.
- Let chlorine dissipate to 0.5 ppm once start-up period is completed. Do not enter pool if the free available chlorine residual is over 3 ppm.
|
|
|
|
|
|
|
Dosage
|
|
For aboveground pools 5,000 to 25,000 gallons.
**Each cartridge lasts approximately 6 months**
|
|
|
|
|
|
|
Ingredients
|
|
Active Ingredients
Metallic Silver - 3.51%
Copper Sulfate Petahydrate - 8.23%
Inert Ingredients
88.26%
|
|
|
|
|
|
|
Product Use
|
|
Use this product for an easy, relatively cheap way to install the Nature2 system on your aboveground pool.
|
|
|
|
|
|