Read all directions and precautions before use.
- Always apply other spa chemicals separeately and never combine products prior to addition to the spa.
- Cense is not a sanitizer.
- For routine disinfection, use an EPA registered product, such as Nature 2 Spa, according to the label's directions.
- When properly used, Cense will help your sanitizer work more efficiently.
- Keep this product dry.
- Use only clean utensils to dispense product.
- Never add water to the product/bottle.
For spa start-up refer to Nature 2 Owners Manual.
For regular use:
- Add 1 tablespoon (aprox= 1.5oz/or 16 grams) per 250 gallons (1000 liters) of water before each spa use.
- Cast Cense into the spa while the spa is under continuous circulation with the cover off until the product is fully dissolved.
- Test for MPS with Nature 2 Spa Test Strips (or equivalent) after allowing enough time for the product to be properly dissolved.
- If the Nature 2 test strips (or equivalent) failt to indicate MPS levels in the 9-12 ppm range add another dose (1 tablespoon per 250 gallons) and re-test before entering the spa.
- After each spa use add 1 tablespoon of Cense to 250 gallons of water.
- Allow time for the product to dissolve before turning off the spa jets.
- Test for pH, total alkalinity and total hardness using Nature 2 Spa Test Strips once a week.
- Adjust Accordingly.
Add 1 tablespoon (1.5 oz.) per 250 gallons of water before each spa use.
Active Ingredients
Potassium Peroxymonopersulfate - 36%
Other Ingredients
54%
Active Oxygen - 3.8%
Use this product as a great alternative to regular oxidizers. This is a powerful non-chlorine oxidizer, and aromatherapy all in one convenient bottle.