|
Nature 2 Cense Quiet Escape
|
|
|
PoolGeek.com Price:
|
|
Product Brand: Nature 2
|
|
|
| Nature 2’s Cense Quiet Escape gives spa owners with a MPS (mono per sulfate) shock treatment that has the added benefit of a fragrance additive that helps eliminate chlorine odors. Cense Quiet Escape’s MPS shock will remove contaminants from your spa water, bringing back the crystal clear water quality you remember without adding any more chlorine to your system. After treatment, all that remains will be the soothing aromas of jasmine, geranium, roses, lavender and rich cedar in the softened water, leaving you nothing to do but soak your worries away. | |
Dosage
Add 1 tablespoon (1.5 oz.) per 250 gallons of water before each spa use.
|
Ingredients
| Potassium Peroxymonopersulfate | 36% | | Other Ingredients | 64% | | Active Oxygen | 3.8% |
|
Product Use
Use this product as a great alternative to regular oxidizers. This is a powerful non-chlorine oxidizer, and aromatherapy all in one convenient bottle.
|
Directions
Read all directions and precautions before use. - Always apply other spa chemicals separately and never combine products prior to addition to the spa.
- Cense is not a sanitizer.
- For routine disinfection, use an EPA registered product, such as Nature 2 Spa, according to the label's directions.
- When properly used, Cense will help your sanitizer work more efficiently.
- Keep this product dry.
- Use only clean utensils to dispense product.
- Never add water to the product/bottle.
For spa start-up refer to Nature 2 Owners Manual. For regular use: - Add 1 tablespoon (approx = 1.5 oz/or 16 grams) per 250 gallons (1000 liters) of water before each spa use.
- Cast Cense into the spa while the spa is under continuous circulation with the cover off until the product is fully dissolved.
- Test for MPS with Nature 2 Spa Test Strips (or equivalent) after allowing enough time for the product to be properly dissolved.
- If the Nature 2 test strips (or equivalent) fail to indicate MPS levels in the 9-12 range add another dose (1 tablespoon per 250 gallons) and re-test before entering the spa.
- After each spa use add 1 tablespoon to 250 gallons of water.
- Allow time for the product to dissolve before turning off the spa jets.
- Test for pH, total alkalinity, and total hardness using Nature 2 Spa Test Strips once a week.
- Adjust Accordingly.
|
Reviews
|
|
|