Pre-Treatment
Plaster Pools:
Allow surfaces to cure according to builder instructions before adding product.
All Pools: Adjust water balance, alkalinity, pH and calcium hardness to dealer recommended levels.
For New Pools: Follow builders recommendations for pool start-up.
**Always follow chlorine generator manufacturers recommendations for salt level**
Initial and Monthly Treatments
1. Start with a clean pool and active pool filtration.
2. Add entire contents of one 8 lb. bag of Salt Water Magic Start-Up for each 6,000 gallons of pool water.
3. With circulation pump running; slowly add Salt Water Magic Start-Up bag contents to pool skimmer. If desired, Salt Water Magic Start-Up can be added directly to pool water (some short term cloudiness may occur).
4. Brush any residual material until dissolved.
5. After all Salt Water Magic Start-Up mineral mix has been applied to pool water with circulation pump running add contents of one 1 L bottle of Natural Chemistry's Salt Water Magic to pool skimmer.
6. Wait 20 minutes after adding product before swimming in pool. After 1 week of operation take a pool water sample to dealer for testing.
**Test pH levels weekly and adjust as necessary. Test phosphate levels monthly.**
Initial Pool Start Up: 8 lb. per 6,000 gallons.
Note: In some pools, application of Salt Water Magic "Start-Up" may cause temporary cloudiness.
This product is a concentrated multi-mineral mix.
Use this product for easy salt water start-up, just add salt. Salt Water Magic Start-Up is compatible with all pool surfaces and can be used with all chlorine generators.