|
|
|
|
|
|
Jacks Magic The Filter Fiber Stuff
|
|
Product # JACKSFILTERFIBER
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Product Description
|
|
Jacks Magic Filter Fiber Stuff gives pool owners an easy way to prevent future staining by treating your pool's sand, DE, and cartridge filters to detect dissolved metals, which normally pass right through them. Jacks Filter Fiber Stuff's formula attracts metals in water to the filter elements, eliminating the need for chemical treatments that can throw your systems pH or alkalinity balance. Simply add this treatment to your filter whenever excessive amounts of metals are detected, and you will keep your pool spotlessly clean and healthy.
|
|
|
|
|
|
|
|
|
Join the Club
|
|
|
|
|
|
|
(Help us help your local charity)
|
|
(See who is the leader of the club)
|
|
|
|
|
|
|
|
|
|
|
Tech Specs
|
|
Chemical Type:
|
Filter Enhancements
|
|
Brand:
|
Jacks Magic
|
|
|
|
|
|
|
Directions
|
|
Pre-Coat
After all exhausted filter media has been backwashed from the filter, slowly pour the appropriate amount of Filter Fiber Stuff into the skimmer while circulation system is operating. Note: Slight agitation of Filter Fiber Stuff is suggested when adding to skimmer box.
Cartridge Filters
To enhance cartridge filter performance and aid in cleaning, add up to 4 oz. (2 cups) of Filter Fiber Stuff per 25 square feet of cartridge filtering area. Only add if cartridge is clean and free of oil and dirt. Clean cartridge if necessary by soaking in an apporopriate cleaning solution. After pool water clarity is achieved, remove dirty cartridge and clean again to remove all dirt, debris, and exhausted Filter Fiber Stuff. Use on a continuous basis to protect cartridge and assist in cleaning.
Sand Filters
To enhance pool clarity with a sand filter, add 4 oz. (2 cups) of Purifiber for every 50 lbs. of sand contained in the filter. Reduce flow. Allow pump to circulate to achieve several pool water turnovers or until water clarity is achieved. After water is clear and/or the sand filter backwash is indicated, back flow the sand filter to remove dirt, debris, and dirty purifiber.
|
|
|
|
|
|
|
Dosage
|
|
Pre-Coat (D.E.) Filters
Replace D.E. with Filter Fiber Stuff.
Cartridge Filters
4 oz. per 25 square feet of cartridge filtering area.
Sand Filters
4 oz. per 50 lbs. of sand contained in the filter.
|
|
|
|
|
|
|
Ingredients
|
|
A blend of materials that help filter effeciency.
|
|
|
|
|
|
|
Product Use
|
|
Use this product to aid in the filtration of small particles that would normally be missed by the filter.
|
|
|
|
|
|