GLB Sticks

One GLB Stick (or as many as may be required to continuously maintain the safe free available chlorine level) for each 5,000 - 10,000 gallons of pool water.

Before the first use of GLB Sticks, be sure to take the following steps.

1. Adjust the pool water to a pH value of 7.2 to 7.8 as determined by a suitable test kit. Further adjust your total alkalinity to a minimum of 100 ppm (parts per million).
2. Stabilize pool water with 30 ppm stabilizer as directed on the container label. Thereafter regular use of GLB Sticks for daily chlorination will provide any needed makeup stabilizer.
3. Superchlorinate (shock treat) your pool water to a 4 ppm residual chlorine.
4. Once your pool has been made ready by following 1, 2, and 3 above, use these GLB Sticks to maintain the free residual chlorine at a safe and efficient 1 - 1.5 ppm of free available chlorine at all times, as determined by the daily or more frequent use of a suitable test kit.
5. By means of a feeder, floater, or skimmer dispenser, immerse one GLB Stick (or as many as may be required to continuously maintain the safe free available chlorine level) for each 5,000 - 10,000 gallons of pool water. NEVER ADD THESE GLB STICKS DIRECTLY INTO THE SWIMMING POOL AS DISCOLORATION OF THE POOL LINER OR FINISH MAY OCCUR.
6. Superchlorinate (shock treat) your pool at least twice monthly (more often in sunbelt regions) during hot weather and peak bather loads. Failure to superchlorinate regularly could result in the growth of algae in your pool.