|
Before Use
**A face mask or underwater goggles should always be used when going underwater to make repairs**
Normal Repairs
1. All surfaces must be clean.
2. Cut round corners on patch.
3. For inflatables and light gauge vinyls, apply adhesive sparingly to patch and press tightly to surfaces to be repaired.
4. Allow to dry for 24 hours.
For Deepwater Repairs
1. All surfaces must be clean.
2. Cut round corners on patches.
3. Apply adhesive to patches, folding the patch over onto itself.
4. When you reach the damaged area underwater, unfold patch and apply immediately to liner, squeezing out all water bubbles.
5. Do not disturb patch for at least 24 hours.
Warning: This product contains Cyclohexanone. Do not use or store near heat or flame. Avoid contact with eyes and prolonged contact with skin.
|