|
1. Dip Strip into water for 1 second, remove.
2. Hold strip level for 30 seconds.
3. Compare total alkalinity, pH, and SoftSwim C (in that order) to the color chart.
4. Re-Dip the strip and rapidly move strip back and forth underwater for 30 seconds.
5. Compare bioguanide part to color chart.
The SoftSwim B levels should register between 30- 50 ppm. If below add more SoftSwim B. Read SoftSwim B directions for proper dosing.
The Total Alkalinity level should register between 125 and 150 ppm. If Total Alkalinity is high add BioGuard Lo N Slo. If total alkalinity is low add BioGuard Balance Pak 100.
The pH levels should register between 7.2-7.8. If pH is high ad BioGuard Lo N Slo. If pH is low add BioGuard Balance Pak 200 according to label directions. SoftSwim C should register between 40-60 ppm. If below 40 ppm, add more SoftSwim C per label directions. If over 60 ppm, contact your BioGuard Dealer for guidance.
|