|
|
|
|
|
|
BioGuard Oxysheen
|
|
Product # OXYSHEEN
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Product Description
|
|
BioGuard Oxysheen is a non-chlorine pool shock treatment. It will destroy contaminants such as perspiration, sun tan oils, and other impurities that can affect swimmer comfort. By destroying organic waste, this product can lower your sanitizer consumption, as well as brighten and clarify your pool water. This product dissolves rapidly and completely, so swimming can resume just 15 minutes after application. Restore sparkle and clarity to your pool water with Oxysheen.
|
|
|
|
|
|
|
|
|
|
|
Tech Specs
|
|
Chemical Type:
|
Shock - Non Chlorine
|
|
Brand:
|
BioGuard
|
|
|
|
|
|
|
Directions
|
- Broadcast the required amount of this product directly into the deep end of the pool with the filtration sytem running.
- Apply in the morning or evening when no bathers are in the water. Swimming or bathing may be resumed in 15 minutes.
- Maintain pH in the range of 7.2-7.6, total alkalinity in the range of 100 ppm to 150 ppm, and calcium hardness in the range of 150 ppm to 300 ppm.
|
|
|
|
|
|
|
Dosage
|
|
Initial Treatment: Use this product at the rate of 2 lb. per 10,000 gallons of pool water.
Regular Treatment: 1 lb. per 10,000 gallons every week. When the water temperature is above 80 degrees or when the pool is subject to heavy use, the treatment (1 lb. per 10,000 gallons) should be made twice weekly.
|
|
|
|
|
|
|
Ingredients
|
|
Active Ingredient: Potassium Peroxymonopersulfate 42.8% Other Ingredients: 57.2%
|
|
|
|
|
|
|
Product Use
|
|
Use this product as a shock treatment to oxidize most nitrogenous wastes in your pool.
|
|
|
|
|
|