BioGuard Mineral Springs Cell Cleaner

*Safety glasses and rubber gloves should be worn when handling this product

1. Turn off circulation system and remove cell according to manufacturers instructions.

2. Plug one end of the cell  and place into a clean, empty 5 gallon plastic bucket.

3. Pour Mineral Springs Cell Cleaner into the cell until it's full. If there is any excess left after filling, pour into the deep end of your pool.

4. Let cell soak for 15-30 minutes.

5. After soaking, pour the contents of the cell into that deepest end of your pool..

6. Rinse the cell with a garden hose.

7. Reinstall the cell and restart circulation.

8. Rinse any spilled solution out of the bucket and off the surrounding area.

1 bottle of Mineral Springs Cell Cleaner should be sufficient to restore your cell to optimal efficiency.

This product contains hydrochloric acid and other highly-effective cleaning agents that will cut through the toughest scale buildup to restore chlorine generator efficiency.

This product is intended to remove all forms of calcium-based scale from chlorine generator cells, restoring their ability to produce enough chlorine to keep your saltwater pool healthy.