Directions
Check all pool equipment and be sure it is working properly. Backwash or clean filter following manufacturers directions. Test pH and adjust to between 7.2-7.6. In Chlorinated pools, add a minimum of 30 ppm stabilizer to reduce the effects of sunlight upon the chlorine residual (Do not add stabilizer to brominated pools.) Prior to use of BioGuard BurnOut Extreme, test pool water for the presence of metals. If any metals are present, add a stain inhibitor product to prevent the deposition of metal stains on pool surfaces. When using the other products as outline in the directions for this product, always follow label directions of those products. Shock: Using Either applications Method A or B, apply 1 lb. per 20,000 gallons of water every week or 1 lb. per 10,000 gallons every 2 weeks when the pool is not in use (preferably at night). Reapply after heavy rain or heavy bather loads. Superchlorination: Super chlorination is needed when cloudy water, strong chlorine odor, eye irritation or high levels of combined chlorine are encountered. Using Either application Method A or B, apply Burnout Extreme at a rate of 2 lbs. per 12,000 gallons of water when the pool is not in use (preferably at night) Kill Algae: To kill algae when growth is evident in the pool. 1. Brush all pool surfaces with a surface compatible brush prior to application of product. 2. Using either application Method A or B, apply BurnOut Extreme at a rate of 2 lbs. per 12,000 gallons of water when the pool is not in use (preferably at night). 3. Keep the pool circulation pump on continuously for the next 24 hours, then backwash or clean the filter. Application Methods: When the maximum depth of the pool is less than 4 feet deep or when water is less than 65 degrees, predissolve using application Method B. For all other applications, use Application Method A. Application Method A: Be sure pool circulation pump is on. Holding bag close to pool surface, broadcast the appropriate dosage of BurnOut Extreme across the surface of the pool in the deep end of the pool. Note: In pools with potentially bleachable surfaces, such as vinyl, paint, fiberglass, or colored plaster, use a pool brush following application. Brush the surfaces to ensure dissolving of the product. Never allow undissolved product to rest in contact with bleachable pool surfaces. Application Method B: Be sure pool circulation pump is on. Dissolve this product outdoors. Use a clean plastic bucket and place water into the bucket. Then add product to water in bucket. Use a clean plastic or wooden spoon to stir. Never add more than 1 lb. of this product to less than 3 gallons of cool water. After dissolving BurnOut Extreme, pour the solution around the edge of the pool with circulation pump on.
|