|
BioGuard Banish
|
|
|
PoolGeek.com Price:
|
|
Product Brand: BioGuard
|
|
|
| BioGuard Banish kills ALL types of swimming pool algae. This fast acting formula will produce results in just 24 hours. This product allows swimmers to return soon after treatment. It is formulated to clear up water while it kills the algae and is approved for use in chlorine and bromine pools. Banish does not affect pH levels, so no readjusting is necessary after application. This product is also approved for use during shock treatments, so there are fewer steps than when using other copper-based algaecides. |  |
Dosage
16 oz. per 10,000 gallons of water.
|
Ingredients
| Copper (metallic) | 3.3% | | Other Ingrdients | 96.7% |
|
Product Use
Use this product to kill all types of pool algae. Compatible with chlorine and bromine pools.
|
Directions
Prior to Application: Ensure all equipment is working properly. If necessary, clean the filer system, adjust pH between 7.2-7.6, and establish a minimum level of 30-40 ppm of stabilizer in chlorinated pools. Vacuum leaves and any other foreign debris from pool. If metal testing indicates a need to use a stain and scale inhibitor, apply that product per label directions. Brush visible algae thoroughly from the pools surface with a surface-compatible brush. Establish and maintain proper chlorine or bromine levels. Treatment of Visible Algae: Add 1lb. of BurnOut Extreme per 10,000 gallons of pool water or 1 lb. of BurnOut 35 per 6,000 gallons of pool water. Follow application directions on these products. Allow to circulate for 1 hour. With pump and filter operating, apply 16 oz. to the heaviest algae growth. Continuously circulate pool water for the next 24 hours. Afterwards, thoroughly brush pool surfaces. Prior to re-entry, test chlorine level. Do not re-enter pool until chlorine level is between 1-4 ppm. In cases of persistent algae, repeat brushing and application after 2 to 4 days. A filter aid may be used 3 days after treatment to enhance filter efficiency.
|
Reviews
|
|
|