Aqua Pill 12 Phosphate 1000

1. Clean or backwash filter.
2. Pierce dots on Phosphate 1000 pill where indicated with enclosed push pin.  With pump running, place pill directly into pool skimmer.  Then treat with AP02 Clarifier Plus Natural Clarifier by adding it to the skimmer at the same time.
3. Run your filter system continuously for at least 24 hours.
4. If filter pressure increases 10 psi over normal, clean or backwash the filter.
5. After 48 hours test the phosphate level with a phosphate test kit approved for swimming pool use.  If required, reapply Phosphate 1000.

Use 5 oz. of Phosphate 1000 per 10,000 gallons of pool water per week to maintain phosphate levels below 125 ppb.