Directions
For Visible Algae Growth: 1. Clean Tile on Pool. 2. Backwash Filter. 3. Disconnect slide and automatice pool cleaner from pool support system. 4. Adjust pH to 7.2-7.4 range. 5. Raise chlorine residual to 3 ppm. 6. Wait 15 Minutes after adding chlorine 7. Add Silvertrine through skimmer at the rate of 8 oz. every 10 minutes until the recommended dosage of 8 oz. of Silvertrine per 10,000 gallons of pool water is reached. If pool has no skimmer, add Silvertrine below water level in front of return by squeezing at the same rate mentioned above. 8. Keep filter in operation during treatment and for a minimum of 72 hours after treatment. 9. For best results, keep filter in operation until condition clears. Maintenance Application for Prevention treatment of non-visible algae: For best results, perform maintenance application on a weekly basis. 1.Clean tile on pool. 2. Backwash filter. 3. Disconnect slide and automatic pool cleaner from pool support system 4. Adjust pH to 7.2-7.4 range. 5. Raise Chlorine residual to 3 ppm 6. Wait 15 minutes after adding chlorine. 7. Add Silvertrine at the rate of 4 oz. every 10 minutes until the recommended dossage of 4 oz of Silvertrine per 10,000 gallons of pool water is reached. If pool has no skimmer, add Silvertrine below water level in front of return by squeezing at the same rate mentioned above. 8. Keep filter in operation during treatment and for a minimum of 72 hours after treatment. 9. For best results, keep filter in operation until condition clears. For Winterizing Before Freezing: 1.Clean tile on pool. 2. Backwash filter. 3. Disconnect slide and automatic pool cleaner from pool support system 4. Adjust pH to 7.2-7.4 range. 5. Raise Chlorine residual to 3 ppm 6. Wait 15 minutes after adding chlorine. 7. Add Silvertrine at the rate of 8 oz. every 10 minutes until the recommended dossage of 48 oz of Silvertrine per 10,000 gallons of pool water is reached. If pool has no skimmer, add Silvertrine below water level in front of return by squeezing at the same rate mentioned above. 8. Keep filter in operation during treatment and for a minimum of 72 hours after treatment.
|